1. Which two programs can you use to add new software packages to your system after it is installed and running?
A. scoadmin(1M) Application Installerand pkgtrans(1)
B. scoadmin(1M) Application Installerand pkgadd(1M)
C. scoadmin(1M) SCO ARCServe/Open Backup Managerand pkgtrans(1M)
D. scoadmin(1M) SCO ARCServe/Open Backup Managerand pkgadd(1M)
Answer: B
2. Which command line creates a character special device file with a major number=19 and a minor number=1?
A. mknod /dev/devicename c 19 1
B. mknod /dev/devicename c 1 19
C. mkdev /dev/devicename c 19 1
D. mkdev /dev/devicename c 1 19
Answer: A
3. Which command allows you to directly connect to a modem that is connected to COM1.
A. cu -d /dev/term/00m
B. cu -d /dev/term/01m
C. cu -l /dev/term/00m
D. cu -l /dev/term/01m
Answer: C
4. Which command is used to assign users to an administrative role?
A. adminuser(1M)
B. adminrole(1M)
C. useradd(1M)
D. usermod(1M)
Answer: B
5. Which command can you use to lock a user account in UnixWare 7?
A. accton(1M)
B. acct(1M)
C. lock(2xnx)
D. passwd(1)
Answer: D
6. Which directory structure contains important system accounting and log files?
A. /etc/acct
B. /etc/security
C. /var/adm
D. /var/spool
Answer: C
7. What is the maximum vxfs (VERITAS) filesystem size?
A. 2 terabytes
B. 1 terabyte
C. 2 gigabytes
D. 1 gigabyte
Answer: B
8. Which answer best describes the bfs filesystem type?
A. It is a special-purpose filesystem that contains all of the stand-alone programs and files for booting your system.
B. It provides resource sharing between machines of different architectures and operating systems.
C. It lets users boot DOS floppies.
D. It uses intent logging and supports extent-based allocation.
Answer: A
9. Which filesystem provides NetWare file services to a UnixWare 7 platform?
A. cdfs
B. dosfs
C. nfs
D. nucfs
Answer: D
10. When running thefdisk(1M) command and selecting se whole disk for UNIX, which statement is true?
A. Any existing partitions are destroyed and the UNIX partition is marked active.
B. Any existing partitions are destroyed and you must manually activate the partition.
C. Any existing partitions are NOT destroyed and the UNIX partition is marked active.
D. Any existing partitions are NOT destroyed and you must manually activate the partition.
Answer: A
11. How many times can you enter the Device Configuration Utility (DCU) during the installation of the UnixWare 7 operating system?
A. Three (3) times
B. Two (2) times
C. One (1) time
D. You cannot enter the Device Configuration Utility during installation.
Answer: C
12. How many partitions can you define on the first hard disk during the installation of the UnixWare 7 operating system?
A. One (1)
B. Two (2)
C. Three (3)
D. Four (4)
Answer: D
13. Which filesystem type is used by default to create the root filesystem during the installation of UnixWare 7?
A. nfs
B. sfs
C. s5
D. vxfs
Answer: D
14. Which scoadmin(1M) manager can you use to configure your network adapter card if you choose to defer network configuration during the installation of the UnixWare 7 operating system?
A. The Modem Manager
B. The Network Configuration Manager
C. The NetWare Manager
D. The Serial Manager
Answer: B
15. How many detected hard disks can you create partitions and filesystems on during the installation of the UnixWare 7 operating system?
A. Eight (8)
B. Six (6)
C. Four (4)
D. Two (2)
Answer: D
16. Which of the following actions occur, when you choose se default disk operations? during the installation of UnixWare 7?
A. A new boot sector installs, the disk is NOT scanned for bad blocks, and the disk geometry is NOT configured.
B. A new boot sector installs, the disk is scanned for bad blocks, and the disk geometry is configured.
C. A new boot sector installs, the disk IS scanned for bad blocks, and the disk geometry is NOT configured.
D. A new boot sector installs, the disk is NOT scanned for bad blocks, and the disk geometry is configured.
Answer: A
17. Which command can you use to test your mouse configuration after the system is installed?
A. m4 (1)
B. make (1)
C. makekey(1)
D. mouseadmin(1)
Answer: D
18. Which command do you use to determine the type of video adapter that is installed in your system?
A. sttydefs(1M)
B. /usr/bin/X11/VideoHelp
C. vtgetty(1M)
D. whodo(1M)
Answer: B
19. Which command do you use to create a set of emergency floppy diskettes?
A. diskadd(1M)
B. disksetup(1M)
C. emergency_disk(1M)
D. emergency_rec(1M)
Answer: C
20. Which command do you use to create emergency recovery tapes?
A. emergency_disk(1M)
B. emergency_rec(1M)
C. tape(1)
D. tapecntrl(1)
Answer: B
21. How much free space must remain in the filesystem that is being used to create the emergency recovery media?
A. 60 megabytes
B. 50 megabytes
C. 40 megabytes
D. 30 megabytes
Answer: D
22. Which pkginfo(1) command line displays the Set Installation Packages (SIPs) that are installed on your UnixWare 7 system?
A. pkginfo -c set
B. pkginfo -d set
C. pkginfo -l set
D. pkginfo -p set
Answer: A
23. Which command can you use to check the accuracy of installed files and compare them to the contents of the /var/sadm/install/contents file?
A. pkgadd(1M)
B. pkgchk(1M)
C. pkginfo(1M)
D. pkgtrans(1M)
Answer: B
24. What is the name of the directory to which a software package is spooled if you do not specify a directory when spooling a software package?
A. /save
B. /tmp
C. /var/spool/pkg
D. /var/tmp
Answer: C
25. You have just installed a UnixWare 7 server, and you know that before you can register the software, you must locate the System ID. Where will you find it?
A. In the scoadmin(1M) License Manager
B. In the scoadmin(1M) Software Manager
C. On the Certificate of License and Authenticity
D. On the mailed or FAXed reply from the SCO Registration Center
Answer: A
26. Which of the following is provided by the SCO Registration Center during the process of registering your software?
A. License Data
B. License Number
C. Registration Key
D. Serial Number Activation Key
Answer: C
27. Which item is provided by the scoadmin(1M) License Managerwhen you install a UnixWare 7 system?
A. SCO System ID
B. License Code
C. Registration Key
D. License Number
Answer: A
28. From which of these filesystem types does the boot(1M) program load?
A. bfs
B. cdfs
C. dosfs
D. nucfs
Answer: A
29. Which of the following can you NOT use the Boot Command Processor (BCP) to accomplish?
A. Display or change default boot parameters
B. Enter single-user state
C. Load another UNIX kernel
D. Start the print service
Answer: D
30. In which file can you add or change default boot parameters?
A. /stand/bfs.blm
B. /stand/boot
C. /stand/smallfs.blm
D. /stand/stage3.blm
Answer: B
31. Which answer best describes the TIMEOUT parameter in /stand/boot?
A. Specifies the number of seconds that the boot program waits before entering single-user state.
B. Specifies the number of seconds that the boot program waits before entering multiuser state
C. Specifies the number of seconds that the boot program waits before entering the networking state.
D. Specifies the number of seconds that the boot program waits for input from the user before loading the kernel.
Answer: D
32. Which file can you edit to change default boot messages?
A. /stand/boot
B. /stand/bootmsgs
C. /stand/help.txt
D. /stand/logo.img
Answer: B
33. Which run-level is used to shut down your system to single-user mode?
A. 0 (zero)
B. 1 (one)
C. 5 (five)
D. 6 (six)
Answer: B
34. Which entry in /etc/inittab is processed the first time init(1M) goes from single-user to multi-user state after the system is booted?
A. bootwait
B. sysinit
C. once
D. wait
Answer: A
35. In which /etc/inittab entry, does the default run-level appear?
A. The initdefault entry
B. The once entry
C. The sysinit entry
D. The wait entry
Answer: A
36. Which one of the following is NOT stored in the inode of a file?
A. The file＊s permissions.
B. The file＊s disk address.
C. The file＊s name.
D. The file＊s last access time.
Answer: C
37. Which command displays the inode number of a file when performing a directory listing?
A. ls -I
B. ls -i
C. ls -N
D. ls -n
Answer: b
38. Which command can you use to display the attributes of any disk device?
A. devattr(1M)
B. displaypkg(1M)
C. diskcfg(1M)
D. dodisk(1M)
Answer: a
39. Which answer best describes the features of the vxfs filesystem?
A. Supports largefiles
B. Uses extent based allocation
C. Supports logical block sizes
D. All of the above
Answer: d
40. Which statement is false?
A. The vxfs filesystem supports the creation of 2 terabyte file sizes by default.
B. The vxfs filesytem supports the creation of up to 2 gigabyte file sizes by default.
C. The vxfs filesystem supports a 4 kilobyte logical block size.
D. The vxfs filesystem supports an 8 kilobyte logical block size.
Answer: a
41. Which files contains the defaults used to create a vxfs filesystem?
A. /etc/default/fstyp
B. /etc/default/vxfs
C. /etc/vfstab
D. /etc/vx/type
Answer: b
42. Which file controls the mounting of filesystems on boot?
A. /etc/default/fstyp
B. /etc/default/vxfs
C. /etc/vfstab
D. /etc/vx/type
Answer: c
43. Which command would you use to add an additional hard disk after installation?
A. diskadd(1M)
B. diskcfg(1M)
C. dodisk(1M)
D. fdisk(1M)
Answer: a
44. Which answer describes the correct order in which diskadd(1M) invokes commands to configure additional disks?
A. fdisk(1M), mkfs(1M), and disksetup(1M)
B. disksetup(1M), fdisk(1M), and mkfs(1M)
C. fdisk(1M), disksetup(1M), and mkfs(1M)
D. None of the above
Answer: c
45. If it exists, in which hard disk slice is the PDINFO (Physical Disk Information) stored?
A. The boot slice
B. The dump slice
C. The var slice
D. The volume management public slice
Answer: c
46. How many hard disk slices are created by default?
A. 16
B. 32
C. 64
D. 128
Answer: a
47. Which serial communications port(s) does UnixWare 7 support by default?
A. COM 1 only
B. COM 2 only
C. COM1 and COM2 only
D. COM1, COM2, COM3, and COM4
Answer: d
48. Which two serial device files support software flow control?
A. /dev/term/00m and /dev/term/00h
B. /dev/term/00m and /dev/term/00s
C. /dev/term/00m and /dev/term/00t
D. /dev/term/00s and /dev/term/00t
Answer: d
49. Which program can you use to view a serial port＊s interrupt address?
A. The Device Configuration Utility
B. The Modem Manager
C. The Network Configuration Manager
D. The Serial Manager
Answer: a
50. Which three port monitors are provided on UnixWare 7 systems?
A. init(1M), liload(1M), and ttyadm(1M)
B. init(1M), liload(1M), and ttymap(1M)
C. init(1M), llistat(1M), and ttyadm(1M)
D. inetd(1Mtcp), listen(1M), and ttymon(1M)
Answer: d
51. Whichanswer is NOT a function of the ttymon(1M) port monitor?
A. Initializes and monitors ports
B. Sets terminal modes, baud rates, and line disciplines for each port it monitors
C. Writes a login prompt on the terminal
D. Sets the type of terminal
Answer: d
52. Which port type supports a serial mouse that is configured on COM1?
A. hardware flow control
B. modem
C. software flow control
D. terminal
Answer: c
53. How would you configure the serial port if you were attaching a serial printer to COM1 using the scoadmin(1M) SerialManager?
A. incoming and outgoing
B. incoming only
C. outgoing only
D. None of the above
Answer: c
54. To directly connect to a modem, which system user must own the serial port device file to which a modem is attached?
A. adm
B. bin
C. root
D. uucp
Answer: d
55. If a serial printer on your UnixWare 7 system uses the XON/XOFF flow control protocol and is connected to COM1, which serial port device file should you choose?
A. /dev/term/00h
B. /dev/term/00m
C. /dev/term/00s
D. /dev/term/00t
Answer: c
56. Which answer is NOT a function of lpsched(1M), the UNIX print scheduler?
A. Accepts files for printing
B. Monitors the status of print jobs
C. Starts programs that interface with the printer
D. Starts network printer sharing
Answer: d
57. If a personal print priority limit is set to 15 for an ordinary user, the user can submit print requests with a priority range of:
A. 15-20
B. 15-29
C. 15-30
D. 15-39
Answer: d
58. Which printer interface script is suitable for most serial and parallel dot matrix printers?
A. prx
B. standard
C. crnlmap
D. emulator
Answer: b
59. Which device file represents a non-retentioning rewinding tape device?
A. ctape1
B. ntape1
C. rtape1
D. nrtape1
Answer: a
60. What support for tape drivers is provided by UnixWare 7?
A. The software supports either SCSI or non-SCSI tapes, but not both.
B. The software supports both SCSI and non-SCSI tapes.
C. The software does not support SCSI DAT tapes.
D. The software supports non-SCSI tapes only.
Answer: b
61. Which command can you use to access and test your tape drive?
A. sdiadd(1M)
B. sdiconfig(1M)
C. tapecntl(1)
D. test(1)
Answer: c
62. What support for CD-ROM drivers is provided by UnixWare 7?
A. The software supports either SCSI or IDE CD-ROMS, but not both.
B. The software supports both SCSI and IDE CD-ROMS.
C. The software does not support SCSI CD-ROMS.
D. The software supports IDE CD-ROMS only.
Answer: b
63. Which system process is the ancestor of all user processes?
A. ifor_pmd(1M)
B. init(1M)
C. syslogd(1M)
D. sysproc(1M)
Answer: b
64. When running theps(1) command, what does an R in the rocess State?field (S) indicate?
A. The process is runnable.
B. The process is defunct.
C. The process is currently running on the processor.
D. The process has finished running and has not been removed from the process table.
Answer: a
65. Which sar(1M) option displays the percentage of time the system is executing system processes?
A. -q
B. -u
C. -r
D. -b
Answer: b
66. Which command can you use to change the priority of a process that is already running?
A. ps(1)
B. sar(1M)
C. nice(1)
D. renice(1)
Answer: d
67. By default, which crontabfile in /var/spool/cron/crontabs is used to manage process accounting in UnixWare 7?
A. adm
B. root
C. sys
D. uucp
Answer: a
68. Which command displays the parameters within a security profile?
A. initprivs(1M)
B. pwck(1M)
C. relax(1M)
D. secdefs(1M)
Answer: d
69. Which answer best describes the purpose of the /etc/default/passwd file?
A. The /etc/default/passwd file controls login and password restrictions.
B. The /etc/default/passwd file controls password aging parameters.
C. The /etc/default/passwd file determines if passwords are required to log in.
D. The /etc/default/passwd file contains the encrypted password.
Answer: b
70. Which command line would an ordinary user enter to add a user with the useradd(1M) command?
A. /sbin/tfadmin useradd [username]
B. /tfadmin useradd [username]
C. useradd [username]
D. usermod [username]
Answer: a
71. Which kernel parameter controls the maximum number of processes that a user can run at any given time?
A. MAX_PROC
B. MAXSLICE
C. MAXUMEM
D. MAXUP
Answer: d
72. Which command can you use to view the current, default, minimum, and maximum value of an autotuned kernel parameter?
A. idbuild(1M)
B. idmknod(1M)
C. idtune(1M)
D. stune(4dsp)
Answer: c
73. Which command would you enter to change the MAXUP kernel parameter to 70?
A. /etc/conf/bin/idbuild 70 MAXUP
B. /etc/conf/bin/idbuild MAXUP 70
C. /etc/conf/bin/idtune 70 MAXUP
D. /etc/conf/bin/idtune MAXUP 70
Answer: d
74. Which command would you use to view the options that were used to create an existing hard disk file system?
A. mkfs /dev/rdsk/c0b0t0d0s4
B. mkfs -m /dev/rdsk/c0b0t0d0s4
C. prtvtoc /dev/rdsk/c0b0t0d0s4
D. prtvtoc -p /dev/rdsk/c0b0t0d0s4
Answer: b
75. If you are receiving errors on a non-root filesystem, what should you do first?
A. Mount the filesystem and and run fsck(1M).
B. Unmount the filesystem and run fsck(1M).
C. Run mkfs(1M) to recreate the filesystem.
D. Run mkfs(1M) to resize the filesystem.
Answer: b
76. To provide compatibility with other UNIX systems, what is the suggested maximum length of a user login name?
A. 8
B. 3
C. 5
D. 12
Answer: a
77. When adding a user with the scoadmin(1M) Account Manager, which files are used to create the user-specific environment files for the Korn shell?
A. /etc/profile and /etc/kshrc
B. /etc/default/profile and /etc/default/kshrc
C. /usr/lib/ksh/profile and /usr/lib/ksh/kshrc
D. /usr/lib/scoadmin/account/skel/.profile and /usr/lib/scoadmin/account/skel/.kshrc
Answer: d
78 Which file does the system run before running the C shell user-specific environment file?
A. /etc/cshrc
B. /etc/default/cshrc
C. /usr/lib/csh/cshrc
D. /usr/lib/mkuser/csh/cshrc
Answer: a
79. If a user has a umask value of 027, what will be the permissions of any new regular file created by that user?
A. -rw-r-----
B. -rwxr-x---
C. -----w-rw-
D. -----w-rwx
Answer: a
80. Which programs are used to create a user?
A. login(1)and thescoadmin(1M) Account Manager
B. passwd(1) and the scoadmin(1M) Account Manager
C. useradd(1M) and the scoadmin(1M) Account Manager
D. usermod(1M) and the scoadmin(1M) Account Manager
Answer: c
81. Which user account parameters can you NOT modify using the scoadmin(1M)Account Manager?
A. group membership and home directory
B. home directory and user password
C. login shell and user umask
D. user login ID and login name
Answer: d
82. For Bourne and Korn shell users, one of the PERSONAL startup files is:
A. $HOME/.login
B. $HOME/.profile
C. /etc/login
D. /etc/profile
Answer: b
83. Which file controls the re-use of a user ID?
A. /etc/skel/ageduid
B. /etc/default/idage
C. /etc/security/ia/ageduid
D. There is not a file that controls the re-use of a user ID. After a user is deleted, it is not possible to re-use an ID.
Answer: c
84. What does the system do with the user＊s home directory and it＊s contents when a user account is deleted using the scoadmin(1M) Account Manager?
A. The home directory and it＊s contents are moved to the /etc/security/ia directory.
B. The home directory and it＊s contents are automatically stored on an archive medium of your choice.
C. The home directory and it＊s contents are left in their original location until the administrator chooses to relocate them.
D. The home directory and it＊s contents are automatically deleted.
Answer: d
85. Peter has a login name peter and is a member of the group admin. Given the following output from ls(1), what does he currently have permission to do with the file named datafile? -r--rw---x 1 peter admin 7042 Aug 3 13:23 datafile
A. He can only read from the file.
B. He can only write to the file.
C. He can only execute the file.
D. He can both read from and write to the file.
Answer: d
86. Which term best describes a system process that runs in the background?
A. daemon
B. defunct
C. parent
D. zombie
Answer: a
87. Using the output from the ps (1) command, how can you identify most daemon processes?
A. The process UID is ystem.? $X?%? &, * + ? ? ? ^^^^
B. There is a? in the ty?column.
C. There is a d in the tatus?column.
D. There is a PID greater than 500.
Answer: b
88. Which signal is sent to process 532 when rootissues the command: kill 532
A. 1
B. 3
C. 9
D. 15
Answer: d
89. Which signal is sent when you press the <Del> key?
A. 2
B. 3
C. 9
D. 15
Answer: a
90. Which signal is sent when you press <Ctrl>\ ?
A. 2
B. 3
C. 9
D. 15
Answer: b
91. Which task can NOT be completed using the scoadmin(1M)Process Manager?
A. Kill a selected process
B. View all processes sorted by user
C. Change the nice(1) value of an executing process
D. Schedule a process for unattended execution
Answer: d
92. Which command sets the system date and time?
A. date(1)
B. cal(1)
C. calendar(1)
D. timex(1)
Answer: a
93. Which directory contains the system default crontabfiles?
A. /etc/default
B. /var/spool/cron/crontabs
C. /usr/lib/scoadmin/tasksched
D. /usr/lib/scoadmin/defaults
Answer: b
94. What is the default filesystem type used to create a filesystem in UnixWare 7?
A. AFS (Acer Fast Filesystem)
B. vxfs (Veritas Filesystem)
C. S5 (System V Filesystem)
D. UFS (Extended S5 Filesystem)
Answer: b
95. What does the following mount(1M) command do: mount -r /dev/dsk/f03ht /mnt
A. It mounts /dev/dsk/f03ht as a read-only filesystem at mount point /mnt.
B. It recursively mounts the directories on /dev/dsk/f03ht.
C. It removes /dev/dsk/f03ht from the mount point /mnt.
D. It gives the status of /dev/dsk/f03ht.
Answer: a
96. When should the fsck(1M) utility be run on the /home filesystem?
A. At least once each hour on a heavily used machine
B. Only when it is unmounted
C. Only when it is mounted
D. Before it is unmounted
Answer: b
97. Which command displays free space in a mounted filesystem?
A. df(1M)
B. du(1M)
C. fstyp(1M)
D. mount(1M)
Answer: a
98. Which command shows filesystem usage by user?
A. df(1M)
B. du(1M)
C. quot(1M)
D. usermod(1M)
Answer: c
99. Which command clears the contents of the /var/adm/syslog file without deleting the file itself?
A. > /var/adm/syslog
B. < /var/adm/syslog
C. clear /var/adm/syslog
D. rm /var/adm/syslogW Times New Roman Courier
Answer: a
100. Which command displays the attributes of a device?
A. df(1M)
B. du(1M)
C. devattr(1M)
D. format(1M)
Answer: c
101. Which command(s) can back up an empty directory file?
A. cpio(1), but nottar(1)
B. tar(1), but not cpio(1)
C. Both cpio(1) and tar(1)
D. Neither cpio(1) nor tar(1)
Answer: a
102. What does the following command line do: tar tv
A. It shows the type of archive device.
B. It shows the time when an archive was created.
C. It updates the time stamp on the default tar(1) device.
D. It displays the table of contents of the default tar(1) device.
Answer: d
103. Which command can you use to start the print service daemon?
A. lpadmin(1M)
B. lpsched(1M)
C. enable(1M)
D. accept(1M)
Answer: b
104. Which menu option should you use to temporarily stop a printer from printing and still allow users to queue new print jobs?
A. Printer Setup Manager > Printer Control > Disable
B. Printer Setup Manager > Server > Stop
C. Printer Job Manager > Select All Jobs > Delete
D. Printer Job Manager > Select All Jobs > Hold
Answer: a
105. Which command would you use to prevent jobs from accumulating in a printer＊s print queue?
A. disable(1M)
B. cancel(1)
C. lpshut(1M)
D. reject(1M)
Answer: d
106. Which command would you use to remove a print job from a printer＊s queue?
A. disable(1M)
B. cancel(1)
C. lpshut(1M)
D. reject(1M)
Answer: b
107. Which command can broadcast a warning to users that the system is shutting down in 15 minutes?
A. init(1M)
B. rc0(1M)
C. shutdown(1M)
D. sync(1M)
Answer: c
108. Which shutdown(1M) option specifies the amount of time the system will pause before shutting down?
A. -f
B. -g
C. -i
D. -y
Answer: b
109. Which command line boots a UnixWare 7 kernel named unix.old from the [boot] prompt?
A. BOOTPROG+unix.old <Enter> boot<Enter>
B. BOOTPROG=unix.old<Enter> boot<Enter>
C. BOOTPROG_unix.old <Enter> boot<Enter>
D. BOOTPROG-unix.old <Enter> boot<Enter>
Answer: b
110. Which command can bring a UnixWare 7 system directly from multiuser to single-user mode?
A. rc0(1M)
B. rc1(1M)
C. shutdown(1M)
D. sync(1M)
Answer: c
【好康分享】 (8)